Skanunu Bearing Cleaner & Lube
Skanunu simultaneously flushes out all that old disgusting crap that worked its way into your races and protects your bearings against rust, dust and other particles you pick-up skating. Skanunu is specially formulated to rejuvenate your dirty or worn bearing sets!
Skanunu Really Wet and Slippery Bearing Cleaner & Lube will:
1) Clean your ABEC rated, swiss, and ceramic bearing sets (Shield, Inner Race, Bearings, Retainer, and Outer Race) with its tough degreasing formula
2) Coat all the metal components with a non-corrosive protective shield to polish and repel water & dirt without harming the plastic, nylon or rubber components typically found in bearing sets.
3) Leave behind a long-lasting non-drying lubricant that keeps you riding faster & longer
Apply Skanunu on new "out-of-the-box" bearings! This is the pertect time to coat & protect them when no grime or dirt is present.
There are two ways to clean your bearing sets with Skanunu Really Wet and Slippery Bearing Cleaner & Lube
1) ON-THE FLY:
Apply Skanunu Really Wet and Slippery Bearing Cleaner & Lube directly to the inner and outer bearing sets of all four wheels.
Spin wheel for maximum penetration then wipe up excess with paper towel or cloth. Reapply as necessary.
2) DEEP CLEAN:
Remove all your bearing sets from the wheels.
Place them in Skanunu Really Wet and Slippery Bearing Cleaner & Lube and let them soak for a few minutes allowing it to get into the set. (You can take the shields off and pull out the retainer then clean inside the inner race and bearings if you know how to do this)
Wipe each set with a rag and place them back into wheels. Your are ready to ride. (If you dissassembled the set, wipe out all the compenents with a cotton swab taking care NOT to lose any bearings then reassemble the set)
Skanunu Really Wet and Slippery Bearing Cleaner & Lube will intensionally feel wet even after you wipe it off. This is because the protectant and lube are left behind on your bearings.
Add to Cart