Showing 1–24 of 26 results

Choose from a huge range of Skateboard bearings to suit your every need! Drop in to Concrete Lines to build your own Skateboard/Longboard or just simply change or repair your bearings at Shop 5a The Strand, Griffith Street, Coolangatta QLD, Australia!

Bear 10mm Ceramic Bearings

$99.99

9 ball precision bearings, removable rubber shields, nylon ball holder or “cage”. Fast and Long lasting. This is what your 10mm axles need.

More

Bones Bearing Cleaner Bottle

$14.99

Bones has spent the last couple of years fine tuning and cutting the cost of their bearing cleaning unit to make it affordable to everyone. The bearing cleaner is designed to clean up to 8 bearings at a time.

They are separated on a pin by 7 spacers to insure good flow of the cleaning agent throughout all the bearings and allowing more room for the debris to works way out. Unfortunately, due to extremely stringent shipping regulations, we cannot supply a cleaning agent. We recommend high purity alcohol or acetone, which can be found at your local hardware store. Some skate shops may carry citrus cleaners or some other solutions which do work but are oil based and will leave a film on the internal workings of the bearings.

When using the bearing cleaning unit and ANY solvents, please make sure to work in a well ventilated area that is not near an open flame. A detailed instruction sheet will also be included with the unit to insure easy and proper use.

More
Sale!

Bones Ceramic Super Reds Bearings

$129.99 $119.99

Bones® Ceramic Super REDS® are lighter and provide faster acceleration because the balls weigh much less. They create less friction and are thus faster than Super REDS®, with or without lubricant! When you get dirt into your Ceramic Super REDS®, the ceramic balls will help to re-polish the steel races flat again, providing a self-healing benefit because ceramic balls are so much harder than steel. Finally, ceramic balls will not rust, further lengthening their life. Ceramic Super REDS® use a bone colored shield with laser-engraved outer races for identification.

Specs:

Features grade 5, silicone nitride, hot isostatically pressed ceramic balls.
Higher quality steel races and a superior surface finish.
Single non-contact removable rubber shield for easy cleaning and less friction.
High speed nylon ball retainer for greater strength and speed.
Pre-lubricated with Speed Cream® racing lubricant.
Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.

More

Bones Race Series Bearings

$44.99

Each Bones Race REDS Bearing is made with upgraded top quality bearing steel, ground to perfection and polished, best for racers who use precision trucks and properly tighten their axle nuts

Precision ground 0.200 built in spacer to provide perfect 0.400 spacing between bearings.

Precision ground extended race eliminates the need for speed washers, and provides better alignment of the bearings when the axle nut is tightened.

Lubricated with Bones Speed Cream R.F.

A groove on the inside of each bearings inner race eliminates weight and allows insertion and removal of the bearing using the Bones Bearing Tool, even on hub wheels

Features:

Precision ground, Skate Rated™ Racing bearings by Bones®
Removable high-speed Nylon™ ball retainers
Removable Non-Contact frictionless shield for easy cleaning
Integrated bearing spacer to provide perfect 0.400″ spacing
Extended race replaces need for spacers and washers
Extended race provides perfect alignment for greater speed and axle reinforcement
Fewer parts mean faster set up

More
Sale!

Bones Reds Bearings

$34.95 $29.99

Bones Swiss Skateboard Bearings have the best reputation in the skateboard industry, and have had this honor for the past 25 years because of their performance and quality. Everyone who rides Swiss knows how fast they are, and most also comment on how long they last, typically several times as long as low cost bearings. Skaters who use Bones Swiss do so because they want the very best equipment they can get and they know the difference between ordinary and exceptional. Our team is a who’s who of top skaters and we are proud to be associated with each one of them.

More

Bones Speed Cream

$9.99

This lubricant is superior to Teflon® based lubricants in skate environments. Speed Cream™ makes your bearings faster and is very long lasting.

More
Sale!

Bones Super Swiss 6 Ball Bearings

$104.95 $89.99

The advantage of only using 6 balls instead of 7 is a quicker acceleration, greater strength and durability of the bearing!

More
Sale!

Bones Swiss Bearings

$99.95 $89.99

These bearings have created the standard by which all other bearings are measured!

More
Sale!

Bones Swiss Ceramics

$199.95 $179.99
Bones Swiss Ceramics are in a class by themselves!
  • Accelerate faster Roll faster and farther
  • Resist dirt and moisture better
  • Help to repair injuries to your races caused by dirt
  • 1 non-contact, removable rubber shields allow easy cleaning
  • High speed Nylon ball retainer for greater strength and speed
  • Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.
More
Sale!

Bones Swiss + Labrynith Shield Bearings

$104.95 $89.99

Each labyrinth seal fits into a groove cut into the inner race without touching the walls or bottom of the groove, so that dirt and water must go through a “labyrinth” or “U” shaped path to get to the inside of the bearing. The labyrinth seals are still removable for cleaning, but the skate time between cleanings is greatly increased.

The Bones Bearing team of skaters who have tried these note that they are just as fast as ever, but are quieter, and stay clean longer. Bones Bearing factory testing confirms this.

More

Bronson Speed Co. G2 Skateboard Bearings

$39.99

Bronson Speed Co. G2 Skateboard Bearings

Bronson Speed Co. G2 Skateboard Bearings are the latest in bearing technology, featuring deep groove raceways to improve bearing lubrication and spin.
Straight edge frictionless shields to reduce dirt and moisture intrusion and added high speed ceramic oil to eliminate break in period and keep you rolling faster straight out of the box.

Features:

Deep groove raceways
Straight edge frictionless shields
High speed ceramic oil
Four spacers

More

Bronson Speed Co. G3 Skateboard Bearings

$64.99

Bronson Speed Co. G3 Skateboard Bearings.

Developed by NHS fun factory the Bronson Speed Co. G3 Skateboard Bearings are a bearing that are designed to keep you rolling in style! They feature an all new construction that have been tested to the max by NHS themselves!

Features:

• Deep Groove Raceways- balls roll deep in raceway channels – reduces side impact damage & breakage
• Straight Edge Frictionless Shields- pop off resistant – holds oil in, dirt and moisture out- easy to clean
• Micro Groove Raceway Surfaces- linear micro-groove surfaces improve bearing lubrication, speed and spin
• Max Impact Cage Design- non- distortion custom cage keeps the balls precision spaced & oil circulating
• Balls Out Technology- eliminates shield and cage contact on impact for a go fast, stay fast bearing
• High Speed Ceramic Oil- nano-ceramic compounds for wear protection – moisture, rust, corrosion resistant
• Factory Fresh Quality- nitrogen filled shrink wrap, reduces metal & oil oxidation until ready to be ridden

 

 

More

Bronson Speed Co. Raw Skateboard Bearings

$89.99

Bronson Speed Co. Raw Skateboard Bearings.

Next Generation Shieldless Bearings, Designed for Today’s Skateboarding.

Features:

“Free at Last!” – Shield Free Design No more shields to get damaged or pop off – the first shield-less bearing designed for skateboarding No shield grooves in either race for no crud, dust and dirt build up – super fast sound and spin

“Fast, Slick & Non-Stick” – Tungsten Coated Races
Micro-thin tungsten dry lubricant coating is fast, slick and non-stick to minimize dirt, dust and crud build up. Tungsten coating is an extremely slick, low drag, long life dry film lubricant with a very low coefficient of friction – Tungsten coating works well with or without liquid lubricants.

“The Sound Of Speed” – Audible Speed Technology Fully open, high spin, and shield free RAW’s are designed to enhance the sound of speed. Run your bearings with no shields? Minimal oil? Like a RAW sound? This bearing’s for you!

“Maximum Impact” – Cage Design Super strong, durable, non-distortion fiberglass filled pure nylon cage keep the balls precision spaced. High wear and tear resistance, increased performance in a low lubricant/increased dust and dirt environment.

“Rollin’ Deep” – Deep Groove Raceways Balls sit and roll deeper in the raceway channels than weaker shallow groove designs. Dramatically reduces axial and angular side impact damage and breakage, surfaces stay smooth and fast.

“Shred Ready” – Factory Fresh Quality 100% hand inspected twice and micro-polished & ultrasonic solvent washed 3X prior to final packaging. Packaged in nitrogen filled packaging – reduces metal and oil oxidation until ready to be ridden.

 

 

More
Out of stock

Earthwing Downhill Speedball Abec-9 8mm Bearings

$39.99

Specs:

Precision 8mm axle holes
.409″ built in spacers
1mm built in speedrings
Lubed with Archoil Nanoceramic Grease

More

Ninja USO Abec 3 Bearings

$34.99

NiNjA Ultra Speed Oil (USO) has the distinct advantage of super high rotational rates (optimum speed). NiNjA USO is synthetically designed to handle both radial and lateral dynamic loading as well as high speed vibrations better than any other speed oil product available. It resists thermal breakdown, resists spin out, and will not attract contaminants. NiNjA USO is micro filtered in the factory specifically for use in skate bearings. Less friction and higher rotation = maximum performance at greater speeds.

More

Ninja USO Abec 5 Bearings

$44.99

NiNjA Ultra Speed Oil (USO) has the distinct advantage of super high rotational rates (optimum speed). NiNjA USO is synthetically designed to handle both radial and lateral dynamic loading as well as high speed vibrations better than any other speed oil product available. It resists thermal breakdown, resists spin out, and will not attract contaminants. NiNjA USO is micro filtered in the factory specifically for use in skate bearings. Less friction and higher rotation = maximum performance at greater speeds.

More

Ninja USO Abec 7 Bearings

$54.99

NiNjA Ultra Speed Oil (USO) has the distinct advantage of super high rotational rates (optimum speed). NiNjA USO is synthetically designed to handle both radial and lateral dynamic loading as well as high speed vibrations better than any other speed oil product available. It resists thermal breakdown, resists spin out, and will not attract contaminants. NiNjA USO is micro filtered in the factory specifically for use in skate bearings. Less friction and higher rotation = maximum performance at greater speeds.

More

Sector 9 Blackball Ceramic Race Bearings

$99.99

Each bearing contains 7 ceramic balls that are much harder than steel, giving you bearing that will bring the heat for a long time.

Ceramic balls are so tough that they actually crush debris that gets finds its way into the bearing, continually polishing the bearing races. These bearings also feature a removable rubber shield making them easy to clean and easy to re-lube.

Specs:

  • Set of 8 Bearings
  • Includes 4 Spacers.
  • Rubber coated shield is removable for easy cleaning
  • Ceramic bearing balls weigh up to 40% less than steel bearing balls
    Hybrid ceramic bearings can operate 20% to 40% faster than conventional bearings
  • Lighter ball allows the bearing to spin faster, and uses less energy to maintain its speed
More

Seismic Tekton Abec 7 Bearings

$44.99

Breakthrough self-aligning design corrects for flaws in bearing seat levelness, bearing seat spacing, axle diameter and axle straightness.

More than two years in development, Seismic Tekton™ bearings feature wide, flat contact surfaces at the ends of integrated, custom-machined half-spacers. The broad flanges square up, co-align and self-stabilize inside your wheels – correcting for flaws in bearing seat levelness, bearing seat spacing, axle diameter and axle straightness.

The Tektons literally block themselves from sitting or rocking out of alignment, so they stay straighter than any other bearing system ever. Your wheels roll faster with better control, while the bearings last longer and stay quieter.

Other features include: ABEC-7 rating, steel balls, nylon retainers, black outer casing, removable rubber-coated steel seals with printed graphic, and a proprietary lubricant combining both oil and grease.

The inner race is stepped underneath the seal to resist contamination, and it’s stepped between the bearing and the flange to save weight. On the side opposite the flange, the inner race extends 0.5mm to form a thin integrated washer. No bearing spacers, axle washers, or World Record budgets required!

More
Out of stock

Seismic Tekton Ceramic Bearings

$139.99

Already in a class by itself, black ceramic balls send the self-aligning Tekton design to a whole new realm of fast.

Compared to even the finest steel bearing balls, ceramic balls have several remarkable advantages that justify their higher cost. They’re significantly lighter and lower in friction, so they accelerate faster and roll further at a higher speed, even with little or no lubricant. They’re so hard and strong that they crush dirt, debris, and even rust, which keeps the steel raceways clean and polished. They dissipate heat better, so bearings (and wheels) run cooler. They’re also rustproof, so they last longer even when ridden in wet conditions.

Seismic Tekton bearings feature wide, flat contact surfaces at the ends of integrated, custom-machined half-spacers. The broad flanges square up, co-align, and self-stabilize inside your wheels – correcting for flaws in bearing seat levelness, bearing seat spacing, axle diameter, and axle straightness.

The Tektons literally block themselves from sitting or rocking out of alignment, so they stay straighter than any other bearing system ever. Your wheels roll faster with better control, while the bearings last longer and stay quieter.

Other features include: top-quality black trisilicon tetranitride (Si3N4) balls, nylon retainers, black outer casings, removable rubber-coated steel seals with printed graphic, and a proprietary lubricant combining both oil and grease. The inner race is stepped underneath the seal to resist contamination, and it’s stepped between the bearing and the flange to save weight. On the side opposite the flange, the inner race extends 0.5mm to form a thin integrated washer. No bearing spacers or axle washers required.

More
Out of stock

Skanunu 100% Bearing Lube

$13.50

Skanunu 100% Lube:

Is 100% Lubricant and is the same found in Skanunu Really Wet & Slippery Bearing Cleaner & Lube

Provides Continued Performance:

Keeps you riding faster & longer

Is Non-Corrosive:

Displaces water & prevents rust formation

All in a 1oz bottle!

How to Use Skanunu 100% Lube

We recommend cleaning your bearings first using a method you feel most comfortable with to get them clean.

Apply a few drops of Skanunu 100% Lube to each bearing set as you would with any other lube.

Put everything back together, as you normally would, then head out for a skate!!!

More

Skanunu Bearing Cleaner & Lube

$15.00

Skanunu simultaneously flushes out all that old disgusting crap that worked its way into your races and protects your bearings against rust, dust and other particles you pick-up skating. Skanunu is specially formulated to rejuvenate your dirty or worn bearing sets!

Skanunu Really Wet and Slippery Bearing Cleaner & Lube will:

1) Clean your ABEC rated, swiss, and ceramic bearing sets (Shield, Inner Race, Bearings, Retainer, and Outer Race) with its tough degreasing formula

2) Coat all the metal components with a non-corrosive protective shield to polish and repel water & dirt without harming the plastic, nylon or rubber components typically found in bearing sets.

3) Leave behind a long-lasting non-drying lubricant that keeps you riding faster & longer

Apply Skanunu on new “out-of-the-box” bearings! This is the pertect time to coat & protect them when no grime or dirt is present.

There are two ways to clean your bearing sets with Skanunu Really Wet and Slippery Bearing Cleaner & Lube

1) ON-THE FLY:

Apply Skanunu Really Wet and Slippery Bearing Cleaner & Lube directly to the inner and outer bearing sets of all four wheels.

Spin wheel for maximum penetration then wipe up excess with paper towel or cloth. Reapply as necessary.

2) DEEP CLEAN:

Remove all your bearing sets from the wheels.

Place them in Skanunu Really Wet and Slippery Bearing Cleaner & Lube and let them soak for a few minutes allowing it to get into the set. (You can take the shields off and pull out the retainer then clean inside the inner race and bearings if you know how to do this)

Wipe each set with a rag and place them back into wheels. Your are ready to ride. (If you dissassembled the set, wipe out all the compenents with a cotton swab taking care NOT to lose any bearings then reassemble the set)

Skanunu Really Wet and Slippery Bearing Cleaner & Lube will intensionally feel wet even after you wipe it off. This is because the protectant and lube are left behind on your bearings.

More
Sale!

Zealous Abec 7 Bearings

$44.95 $29.99

The unique feature of the Zealous lubricant is how the nanoceramic compound fills in deformations or asperities in the bearing. These deformations cause friction and heat around them which hardens the nano-ceramic compound to that specific area. This micro coating is 5 times the hardness of the host alloy and has a molecular bond with the host metal, filling in all the asperities and eliminating friction over time.

Specs:

• Precision 8mm axle holes
• .409″ built in spacers
• 1mm built in speedrings
• Green rubber seals to keep dirt and debris on the outside of the bearing.
• Lubed with Archoil Nanoceramic Grease

The coefficient of friction is the lowest in the field of Tribology at 0.003% creating a near frictionless surface. Mainly because the nanoceramic compound eliminates all asperities.

Extremely low water washout

Corrosion on the inside of the bearing is eliminated.

Yeeeew – Amazing!!!!

More

Zealous Ceramic Bearings

$69.99

Zealous Bearings have been some of the most popular bearing in the last few years. High quality bearings with built-in spacers and double rubber seals; what more could you ask for?

Well, what about ceramics?

Lighter, stronger, smoother than metal ball bearings and they’re also very corrosive resistant.

Specs:

Precision 8mm axle holes
.4045″ built in spacers
.5mm built in speed rings
Strengthened Nylon Ball Retainers
White rubber seals to keep dirt and debris on the outside of the bearing.
Lubed with Custom Nano-ceramic Grease

– Ceramic balls are lighter, stiffer, smoother and naturally corrosion resistant. This means Zealous can use a lower viscosity lubricant which makes them fast right out of the tube.

– The unique feature of Zealous’ lubricant is how the nano-ceramic compound fills in deformations or asperities in the bearing. These deformations cause friction and heat around them which hardens the nano-ceramic compound to that specific area. This micro coating is 5 times the hardness of the host alloy and has a molecular bond with the host metal, filling in all the asperities and eliminating friction over time.

– The coefficient of friction is the lowest in the field of Tribology at 0.003% creating a near friction-less surface. Mainly because the nano-ceramic compound eliminates all asperities.

– Corrosion on the inside of the bearing is nearly eliminated.

More