Landyachtz Dinghy Handstand Cruiser – Deck Only

Polar Bear 155mm Trucks are legit when it comes to a shreddable standard kingpin truck!

These trucks have a 8 hole base plate, so you’re able to mount your truck right where you want it when riding a board with old school or new school hole pattern. The stock bushings are a little soft, so you may wish to upgrade them to get the most out of your new favourite trucks.

The Baseplate:

– Featuring 8 holes, so you’re able to mount your truck right where you want it when riding a board with old school or new school hole pattern.
– All mounting holes are accessible with a skate tool
– Low Profile, only 2″ from the surface to the center of the axle. Grizzlies are 2.6″
– Added material to impact areas where more meat is needed, in front of the pivot cup and behind the bushing seat.
– Removed material from the bottom of the base plate to reduce weight
– Allows for top mount or drop through mounting

The Hanger:

– Extensive computer modeling and physical tests were done to engineer the strongest hanger on the market.
– Gussets were added on the underside of the hanger to ensure strength in all directions
– Material removed from the front of the hanger to reduce weight
– Shaped around the top bushing so that the washer doesn’t hit the hanger and ensures tools are easy to use.
– Hangers are faced so bearings run clean and square
– Heat treatments provide a very strong finish, this means the hanger doesn’t wear down quickly when grinding.
– The Axle lengths are precise, designed not to stick out of your nuts, and preventing ground axles.

The Bushings:

– Many bushing combos were tested, the stock bushings are an ideal middle ground. Great for carving and tight turning as well as stable for faster riding.
– The bottom bushing is a standard 90a barrel 15mm tall.
– The top bushing is a small cone, also 90a, 10.5mm tall.